The CLASIC metal tile is profiled in steel with a thickness between 0.40 and 0.60 mm, zinc-coated (Z225-Z275), covered with a layer of glossy or dull type paint.

This type of metal roofing is the most widely used, similar to classical tiles and is used especially in residential buildings. The CLASIC metal tile is produced in a wide range of colors.

Metal roofing panels are available in lengths between 500 mm and 7000 mm. For long waterline lengths, where covering with a single tile panel is not recommended, two or more metal roofing panels must be used. This provides the calculation of the bottom panels as a multiple of tiles, taking into account the technical overlap of 150 mm.


Technical characteristics

Material Steel sheet, galvanized on both sides, protected with polyester
Nominal thickness 0,4 - 0,6 mm
Total width 1200 mm

Effective coverage width

1120 mm
Module length 350 / 400 mm
Total height 40 mm
Weight per area 3 - 5 kg / sqm
Minimum slope 8° if no diagonal joints are necessary/ 14 ° in the case of diagonal joints
Glossy finish warranty 10-year warranty for color characteristics and corrosion
Matte finish warranty 15-year warranty for color characteristics and corrosion
GrandeMat finish warranty 30-year warranty for color characteristics and corrosion
Expected lifespan 60 years for the roof, resistance to temperature changes

Glossy finish

Matte finish

GrandeMat finish

Colours may appear differently on different screens. If in doubt, please ask a BILKA representative to show you the color chart.