S18 SINUS

Image
Material Steel, galvanized sheet metal on both sides protected with polyester
Nominal thickness 0,4 – 0,7 mm
Total width 1100 mm
Covering useful width 1050 mm
Corrugation height 18 mm
Minimum slope 8° if no diagonal joints are necessary / 14° in the case of diagonal joints
Súly 3 – 7 kg/sqm
Glossy finish warranty 10-year warranty for colour characteristics and corrosion
Matte finish warranty 15-year warranty for colour characteristics and corrosion
Wood finish warranty 15-year warranty for colour characteristics and corrosion
GrandeMat finish warranty 30-year warranty for colour characteristics and corrosion
Estimated life cycle 60 years for the roof, withstands temperature fluctuations

Product description

The sheet metal S18 Sinus is used for the construction and renovation of civil, industrial and agricultural buildings, both for the roof and interior and exterior walls. It is the ideal solution for short term delivery buildings, low-budget and superior aesthetic requirements buildings.

Production specifications

  • BILKA S18 Sinus corrugated sheet metal is made with a nominal thickness between 0.4 – 0.6 mm, based on the construction requirements
  • the standard length of the modules ranges from 0.500m to 13.5 m. Execution of modules with different lengths from the standard ones will be made after prior consultation with BILKA specialist.
  • wide range of colors
Image

Glossy Finish

Matte Finish

GrandeMat Finish

Wood Finish