T12 ROOFING SHEET

Image
Material Steel, galvanized sheet metal on both sides protected with polyester
Nominal thickness 0,3 – 0,7 mm
Total width 1140 mm | 910 mm
Covering useful width 1080 mm | 860 mm
Corrugation height 12 mm
Weight on the surface 2 – 7 kg/sqm
Glossy finish warranty 10-year warranty for colour characteristics and corrosion
Matte finish warranty 15-year warranty for colour characteristics and corrosion
Wood finish warranty 15-year warranty for colour characteristics and corrosion
GrandeMat finish warranty 30-year warranty for colour characteristics and corrosion
Estimated life cycle 60 years for the roof, withstands temperature fluctuations

Corrugated steel sheet T12 is made of steel sheet, galvanized on both sides and protected with polyester.

It is used for partitioning spaces for constructions, production, warehousing, for the delimitation of opened construction spaces (shelters, warehouses, terraces etc.), for decorating interior and exterior ceiling surfaces, for fences, household annexes etc.

Production specifications

  • BILKA T12 corrugated steel sheet is made with a nominal thickness between 0.3 – 0.7 mm, based on the construction requirements.
  • The standard length of the modules ranges from 0.500 m and 13.5 m. Execution of the modules with different lengths from the standard ones will be made after prior consultation with the technical specialist from BILKA.
  • Bilka T12 corrugated steel sheet is profiled in two options: from raw material with a width of 1250 mm and from raw material with a width of 1000 mm.
  • wide range of colors
Image

Glossy Shades

Matte Shades

GrandeMat Shades

Wood Shades