T12 ROOFING SHEET

Image
Material Steel, galvanized sheet metal on both sides protected with polyester
Nominal thickness 0,4 – 0,7 mm
Total width 1150 mm
Covering useful width 1100 mm
Corrugation height 18 mm
Minimum slope 8° if no diagonal joints are necessary / 14° in the case of diagonal joints
Weight on the surface 2 – 7 kg/sqm
Glossy finish warranty 10-year warranty for colour characteristics and corrosion
Matte finish warranty 15-year warranty for colour characteristics and corrosion
Wood finish warranty 15-year warranty for colour characteristics and corrosion
GrandeMat finish warranty 30-year warranty for colour characteristics and corrosion
Estimated life cycle 60 years for the roof, withstands temperature fluctuations

Product description

T18 corrugated steel sheet is manufactured in steel sheet, galvanized on both sides and protected with polyester.

It is used especially on facades, fences or ceilings but can be mounted on the roof as covering.

Production specifications

  • BILKA T18 corrugated sheet metal is manufactured with a nominal thickness between 0.4 – 0.7 mm, based on the construction requirements, the standard length of the modules ranges from 0.500 m and 13.5 m. Execution of modules with different lengths from the standard ones will be made after prior consultation with BILKA specialist.
  • corrugated sheet metal modules are manufactured at a nominal width of 1,000 and 1,150 mm.
  • corrugated sheet metal is profiled in two options: with folds outward for facade and folds inward for the roofs
  • wide range of colors
  • T18 P for facade
  • T18 A for the roof
Image

Glossy Finish

Matte Finish

GrandeMat Finish

Wood Finish